𝙃𝙤𝙬 𝙩𝙤 𝙨𝙚𝙩 𝘽𝙜𝙢𝙞 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚 𝙞𝙣 30 𝙈𝙞𝙣𝙪𝙩𝙚𝙨 (𝙁𝙤𝙧 𝙖𝙡𝙡 𝙙𝙚𝙫𝙞𝙘𝙚𝙨)

𝙃𝙤𝙬 𝙩𝙤 𝘼𝙥𝙥𝙡𝙮 𝘼 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚 𝙞𝙣 𝘽𝙂𝙈𝙄 (𝘾𝙤𝙢𝙥𝙡𝙚𝙩𝙚 𝙎𝙩𝙚𝙥𝙨)

I remember the very first moment I decided to utilize a sensitivity code. It took less than 30 minutes for me to complete, and all of a sudden, my aim felt significantly smoother. Here’s the breakdown for you.

Mastering BGMI sensitivity settings for better aim and recoil control

Step By Step Guidance

1. 𝙊𝙥𝙚𝙣 𝘽𝙂𝙈𝙄 𝙖𝙣𝙙 𝙩𝙝𝙚𝙣 𝙜𝙤 𝙩𝙤 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨 ⚙
   From the main lobby, click the setting tab found at the bottom bar.
2. 𝘾𝙡𝙞𝙘𝙠 𝙤𝙣 “𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮"
   Scroll down until you see the Sensitivity tab.
3. 𝘾𝙡𝙞𝙘𝙠 𝙤𝙣 𝙏𝙝𝙚 𝘾𝙤𝙙𝙚 𝙄𝙘𝙤𝙣 (𝙈𝙖𝙜𝙣𝙞𝙛𝙮𝙞𝙣𝙜 𝙂𝙡𝙖𝙨𝙨 🔍)
   This is normally found towards the bottom right corner of the Sensitivity screen.
4. 𝙋𝙖𝙨𝙩𝙚 𝙏𝙝𝙚 𝙍𝙚𝙦𝙪𝙞𝙧𝙚𝙙 𝘾𝙤𝙙𝙚
   Copy your desired code you plan to use. Paste it in the designated box and click “Preview” to check if the changes appear.
5. 𝙏𝙚𝙨𝙩 𝙖𝙣𝙙 𝙖𝙙𝙟𝙪𝙨𝙩
   - Move around, aim, and shoot in the training ground.
   - If anything feels odd, adjust as required or use the slider controls.
6. 𝘼𝙥𝙥𝙡𝙮 𝙖𝙣𝙙 𝙎𝙖𝙫𝙚
   - If your settings were adjusted correctly, press “OK” to save your changes.

𝙎𝙩𝙚𝙥𝙨 𝙩𝙤 𝙎𝙝𝙖𝙧𝙚 𝙔𝙤𝙪𝙧 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚

Mastering BGMI sensitivity settings for better aim and recoil control

1. Go to 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨 > 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮.
2. Press “𝙐𝙥𝙡𝙤𝙖𝙙 𝙩𝙤 𝘾𝙡𝙤𝙪𝙙.”
3. To retrieve your code, go to “ 𝘾𝙡𝙤𝙪𝙙 𝙈𝙖𝙣𝙖𝙜𝙚𝙢𝙚𝙣𝙩,” then “𝘾𝙤𝙥𝙮 𝙖𝙣𝙙 𝙎𝙝𝙖𝙧𝙚.”

𝙄𝙢𝙥𝙤𝙧𝙩𝙖𝙣𝙘𝙚 𝙤𝙛 𝘽𝙂𝙈𝙄 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚

Like many others, my integration with BGMI was marked by difficulties revolving around aim shakiness and spray recoil. Attempting to copy random settings from YouTube videos proved useless until I got to know about BGMI sensitivity code, which allows you to apply sensitivity settings in bulk. It was a complete changer for me.

Sensitivity codes are a combination of digits corresponding to the necessary settings in BGMI. These codes automatically configure camera settings like the ADS, sensitivity, gyroscope sensitivity among others. This saves you from manually adjusting each scope, which can take ages and lead to confusion.

𝙁𝙞𝙣𝙚 𝙏𝙪𝙣𝙞𝙣𝙜: 𝘿𝙚𝙫𝙞𝙘𝙚 𝙖𝙣𝙙 𝙋𝙡𝙖𝙮𝙨𝙩𝙮𝙡𝙚 𝙎𝙥𝙚𝙘𝙞𝙛𝙞𝙘 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨

After applying a code, you may find your aim has improved, but not “perfect.” This “imperfection” is perfectly normal. Phones differ in their touch response, screen size, and hardware. Here’s how I fine-tune my settings to optimize results.

𝙈𝙖𝙣𝙪𝙖𝙡 𝘼𝙙𝙟𝙪𝙨𝙩𝙢𝙚𝙣𝙩 𝙎𝙩𝙧𝙖𝙩𝙚𝙜𝙞𝙚𝙨

• 𝙄𝙣𝙘𝙧𝙚𝙖𝙨𝙚 𝙨𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝙗𝙮 5-7% if your aim feels sluggish or your spray is going downward.
• 𝘿𝙚𝙘𝙧𝙚𝙖𝙨𝙚 𝙨𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝙗𝙮 5-7% if your aim tends to be overly fast, or your spray going upward.
• 𝙄𝙛 𝙮𝙤𝙪𝙧 𝙨𝙥𝙧𝙖𝙮 𝙨𝙝𝙞𝙛𝙩𝙨 𝙡𝙚𝙛𝙩 𝙤𝙧 𝙧𝙞𝙜𝙝𝙩: Make a small change to your horizontal sensitivity (3-4%).
• 𝙄𝙛 𝙮𝙤𝙪𝙧 𝙨𝙥𝙧𝙖𝙮 𝙨𝙝𝙞𝙛𝙩𝙨 𝙪𝙥 𝙤𝙧 𝙙𝙤𝙬𝙣: Change the vertical sensitivity (3-4%).

𝙀𝙭𝙖𝙢𝙥𝙡𝙚: Once, I copied a pro player’s code and my sprays were always going up. I reduced 3x and 4x scope sensitivities by 6 percent and all of a sudden my M416 sprays were improved a lot.

𝘿𝙚𝙫𝙞𝙘𝙚 𝙎𝙩𝙖𝙗𝙞𝙡𝙞𝙩𝙮

• 𝙃𝙞𝙜𝙝-𝙚𝙣𝙙 𝙥𝙝𝙤𝙣𝙚𝙨: Have higher sensitivity control.
• 𝘽𝙪𝙙𝙜𝙚𝙩 𝙥𝙝𝙤𝙣𝙚𝙨: May require less sensitivity for better control.

Perform various gun tests in the training ground and hip-fire ADS until you reach optimal control.

𝙄𝙛 𝙮𝙤𝙪 𝙬𝙖𝙣𝙩 𝙩𝙤 𝙧𝙚𝙖𝙙 𝙖 𝙙𝙚𝙩𝙖𝙞𝙡𝙚𝙙 𝙗𝙡𝙤𝙜 𝙖𝙗𝙤𝙪𝙩 𝙝𝙞𝙜𝙝-𝙚𝙣𝙙 𝙥𝙝𝙤𝙣𝙚𝙨, 𝙢𝙞𝙙𝙧𝙖𝙣𝙜𝙚 𝙥𝙝𝙤𝙣𝙚𝙨 𝙖𝙣𝙙 𝙗𝙪𝙙𝙜𝙚𝙩 𝙛𝙧𝙚𝙞𝙣𝙙𝙡𝙮 𝙥𝙝𝙤𝙣𝙚𝙨 𝙛𝙤𝙧 𝘽𝙂𝙈𝙄, 𝙮𝙤𝙪 𝙨𝙝𝙤𝙪𝙡𝙙 𝙙𝙚𝙛𝙞𝙣𝙞𝙩𝙚𝙡𝙮 𝙘𝙝𝙚𝙘𝙠 𝙤𝙪𝙩 𝙩𝙝𝙞𝙨 𝙗𝙡𝙤𝙜: Bgmi 90Fps Supported Devices

𝙈𝙖𝙣𝙪𝙖𝙡 𝙨𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝙘𝙤𝙣𝙛𝙞𝙜𝙪𝙧𝙖𝙩𝙞𝙤𝙣: 𝙜𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 𝙫𝙨 𝙣𝙤𝙣-𝙜𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 𝙨𝙚𝙩𝙩𝙞𝙣𝙜𝙨

Not everyone uses the same device. Some players might use a gyroscope to aim, while others might prefer non-gyroscope. This outlines both configurations.

𝙂𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨

Controlling aim by tilting the device is referred to as the gyroscope. This is useful as a recoil control during long sprays.

𝙃𝙤𝙬 𝙩𝙤 𝘼𝙙𝙟𝙪𝙨𝙩:
- If recoil goes up, lower the sensitivity.
- If you can’t move fast enough, increase it by 5-7%.

𝙉𝙤𝙣-𝙂𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨

For thumb or claw (multi-finger) players who don’t use gyroscope.

𝙃𝙤𝙬 𝙩𝙤 𝘼𝙙𝙟𝙪𝙨𝙩:
- If your aim is too slow, increase the sensitivity.
- If your aim goes high, lower it slightly.

𝙋𝙧𝙤 𝙋𝙡𝙖𝙮𝙚𝙧 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚𝙨 (𝙂𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 & 𝙉𝙤𝙣-𝙂𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚)

I tried obtaining configuration settings from leading BGMI and PUBG Mobile professionals. Here are the sensitivity codes of 10 players—4 from India and 6 from the international scene. These codes are famous for their no-recoil spray control.

𝙄𝙣𝙙𝙞𝙖𝙣 𝙋𝙧𝙤𝙛𝙚𝙨𝙨𝙞𝙤𝙣𝙖𝙡 𝙋𝙡𝙖𝙮𝙚𝙧𝙨

𝙒𝙤𝙧𝙡𝙙 𝘾𝙡𝙖𝙨𝙨 𝙋𝙧𝙤𝙛𝙚𝙨𝙨𝙞𝙤𝙣𝙖𝙡 𝙋𝙡𝙖𝙮𝙚𝙧𝙨

𝙉𝙤𝙩𝙚: These codes have been verified and are up to date as of this writing. Always try them in training before using them in ranked matches.

𝙕𝙚𝙧𝙤 𝙍𝙚𝙘𝙤𝙞𝙡 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮: 𝘽𝙚𝙨𝙩 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨 𝙛𝙤𝙧 𝙇𝙖𝙨𝙚𝙧 𝙎𝙥𝙧𝙖𝙮

Everyone wishes for that truly no recoil experience—3x or 4x scopes where bullets continue to strike the exact same spot. The following is how I accomplished zero recoil sensitivity after numerous trials.

𝙊𝙥𝙩𝙞𝙢𝙖𝙡 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨 𝙁𝙤𝙧 𝙕𝙚𝙧𝙤 𝙍𝙚𝙘𝙤𝙞𝙡 𝘾𝙖𝙢𝙚𝙧𝙖 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮

𝘾𝙖𝙢𝙚𝙧𝙖 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 (𝙁𝙧𝙚𝙚 𝙡𝙤𝙤𝙠):
- TPP View: 100%
- FPP View: 83%
- During Parachute: 99%

𝙕𝙚𝙧𝙤 𝙍𝙚𝙘𝙤𝙞𝙡 𝘾𝙖𝙢𝙚𝙧𝙖 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮:
- TPP No Scope: 120%
- FPP No Scope: 131%
- Red Dot and Holographic: 50%
- 2x: 30%
- 3x: 22%
- 4x: 14%
- 6x: 12%
- 8x: 10%

𝙕𝙚𝙧𝙤 𝙍𝙚𝙘𝙤𝙞𝙡 𝘼𝘿𝙎 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮:
- TPP No Scope: 105%
- FPP No Scope: 89%
- Red Dot & Holographic: 50%
- 2x: 30%
- 3x: 23%
- 4x: 18%
- 6x: 20%
- 8x: 20%

𝙕𝙚𝙧𝙤 𝙍𝙚𝙘𝙤𝙞𝙡 𝙂𝙮𝙧𝙤𝙨𝙘𝙤𝙥𝙚 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮:
- TPP No Scope: 355%
- FPP No Scope: 400%
- Red Dot: 300%
- Holographic: 301%
- 2x: 301%
- 3x: 272%
- 4x: 200%
- 6x: 156%

𝙏𝙞𝙥: If your spray goes up, decrease the gyroscope sensitivity a bit. If it goes down, increase it slightly.

𝙎𝙩𝙚𝙥-𝙗𝙮-𝙎𝙩𝙚𝙥: 𝙃𝙤𝙬 𝙄 𝙈𝙖𝙣𝙪𝙖𝙡𝙡𝙮 𝙎𝙚𝙩 𝙈𝙮 𝙊𝙬𝙣 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮

We all know that sometimes your preferred style doesn’t match with the codes provided. Let me share how I tweak my settings in a more hands-on way.

1. 𝙎𝙩𝙖𝙧𝙩 𝙬𝙞𝙩𝙝 𝙖 𝙋𝙧𝙤 𝘾𝙤𝙙𝙚
   Get inspired selecting someone’s preset from your favorite players.
2. 𝙏𝙚𝙨𝙩 𝙀𝙫𝙚𝙧𝙮 𝙎𝙘𝙤𝙥𝙚 𝙞𝙣 𝙏𝙝𝙚 𝙏𝙧𝙖𝙞𝙣𝙞𝙣𝙜 𝙂𝙧𝙤𝙪𝙣𝙙
   - Use every single scope: red dot, 2x, 3x, 4x and 6x.
   - Spray on a wall and hill area to observe the aim accurately.
3. 𝘼𝙙𝙟𝙪𝙨𝙩 𝙂𝙧𝙖𝙙𝙪𝙖𝙡𝙡𝙮
   If spray goes up, decrease sensitivity by 5-7%.
   If spray goes down, increase by 5-7%.
   If spray moves left/right, tweak horizontal sensitivity.
4. 𝙐𝙨𝙚 𝘿𝙞𝙛𝙛𝙚𝙧𝙚𝙣𝙩 𝙒𝙚𝙖𝙥𝙤𝙣𝙨
   - Best performing guns include M416, and DP-28.
5. 𝙋𝙡𝙖𝙮, 𝙎𝙖𝙫𝙚, 𝙖𝙣𝙙 𝙍𝙚-𝙏𝙚𝙨𝙩 𝙎𝙚𝙩𝙩𝙞𝙣𝙜𝙨
   After completing these steps, classic matches can now be played after saving the settings.

𝙈𝙮 𝙀𝙭𝙥𝙚𝙧𝙞𝙚𝙣𝙘𝙚: There was a time when I used to struggle with 4x scope sprays. After decreasing my 4x gyroscope sensitivity by 6-10%, my sprays became much more stable. It took about 25 minutes to get everything feeling just right.

𝘼𝙡𝙡 𝙨𝙩𝙮𝙡𝙚𝙨 𝙘𝙤𝙢𝙗𝙞𝙣𝙚𝙙 𝙩𝙞𝙥𝙨 𝙖𝙗𝙤𝙫𝙚 (𝙏𝙝𝙪𝙢𝙗 𝙋𝙡𝙖𝙮𝙚𝙧, 3 𝙩𝙤 6 𝙛𝙞𝙣𝙜𝙚𝙧𝙨 𝙋𝙡𝙖𝙮𝙚𝙧)

• For the thumb style users, start off with a lower sensitivity.
• For the 3/4/5/6 finger style, adjust depending on how fast aim/tracking motions are executed.
• Keep aim assist ON for tracking but challenge yourself sometimes with turn it OFF.

𝙁𝙞𝙣𝙖𝙡 𝙏𝙝𝙤𝙪𝙜𝙝𝙩𝙨: 𝙏𝙝𝙚 𝙋𝙖𝙩𝙝 𝙩𝙤 𝙩𝙝𝙚 𝙐𝙡𝙩𝙞𝙢𝙖𝙩𝙚 𝘽𝙂𝙈𝙄 𝙎𝙚𝙣𝙨𝙞𝙩𝙞𝙫𝙞𝙩𝙮 𝘾𝙤𝙙𝙚

Your BGMI sensitivity code is key to unlocking new levels of your gameplay. Setting it will greatly increase improvement, but make sure it is device specific and matches your playstyle. Use codes by known pros, make adjustments where necessary, and always test in training before jumping into ranked matches. Whether you’re a gyroscope master or a thumb player, the right sensitivity can make all the difference in Battlegrounds Mobile India.

For more advanced strategies, top esports sites like AFK Gaming, Sportskeeda, and SportsAdda are great to learn from, offering fresh updates and insider tips.

Set your BGMI sensitivity code in just a few clicks for improved gameplay! It could be the difference that lands you the next chicken dinner!